How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask AMEDEE Your Own Question
AMEDEE
AMEDEE, CHEVY TECHNICIAN
Category: Chevy
Satisfied Customers: 25084
Experience:  ASE certified tech ADVANCED LEVEL SPECIALIST. Wisconsin certified emissions state inspector
279429
Type Your Chevy Question Here...
AMEDEE is online now
A new question is answered every 9 seconds

01 Silverado keeps burning up ignition control modules,

Customer Question

01 Silverado keeps burning up ignition control modules, ignition coils, and crank position sensors. Is this a grounding problem?
JA: Does the vehicle stall at low speeds? Does it sputter?
Customer: Intermittedly.
JA: Are you fixing your Silverado yourself? What have you tried so far?
Customer: Trying might be more accurate. Replaced distributer cap, ignition system held up for a period of months after that. Ignition control modules have lasted as little as 2 months - verified failure at auto parts store. I'm wondering if I'm getting a power surge somehow.
JA: Anything else you want the mechanic to know before I connect you?
Customer: Yes. Problems have stranded driver - stalled while driving. But mostly cases of no start - no spark condition. It does get fuel.
Submitted: 1 month ago.
Category: Chevy
Expert:  AMEDEE replied 1 month ago.

Hello and welcome!

My name isCustomerand I can assist you with your question.

Expert:  AMEDEE replied 1 month ago.

The most likley cause of this condition is either faulty new parts or a bad PCM.

I would rule out faulty new parts first and then replace the PCM as needed.

Hope this helps!!