How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Chevy Technician
Category: Chevy
Satisfied Customers: 15133
Experience:  GM Grand Master Technician 2007. 14 years experience.
10949255
Type Your Chevy Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

What size t-bit do I need to remove seat belt form the

Customer Question

what size t-bit do I need to remove seat belt form the piller on a 2000 monte ss
Submitted: 25 days ago.
Category: Chevy
Expert:  Gary replied 25 days ago.

Hi there,

Do you have any Torx bits?

I would say it is a T40, T45, or T50.

Gary

Customer: replied 25 days ago.
I need to know what size I could have guessed at it as well!
Customer: replied 25 days ago.
I payed 18.00 for this?
Expert:  Gary replied 20 days ago.

Hi again,

I see no other tech has offered help.

T50 is the size.

You'll need a good quality bit, and a 1/2 drive breaker bar to loosen it.

Gary