How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gary Your Own Question
Gary, ASE Certified Technician
Category: Chevy
Satisfied Customers: 880
Experience:  Senior Technician
Type Your Chevy Question Here...
Gary is online now
A new question is answered every 9 seconds

I have a 2010 Chevrolet Cobalt and I am experiencing

Customer Question

I have a 2010 Chevrolet Cobalt and I am experiencing shifting problems and I am not getting an engine code. When shifting into 2nd gear sometimes it shifts hard, then it says I lose power steering (I don't but that comes up every Time) and it continues to shift hard the entire time I drive it until I turn off the engine and restart it. I've had the TCM module replaced and it's still happening I don't know what to do
Submitted: 5 months ago.
Category: Chevy
Expert:  Gary replied 5 months ago.

Hi Eric,

Sounds like a similar issue to Chevy Cruze.

I would check, clean and tighten all the body ground points, 5 in total.

I would also have all the modules checked for current software.

Only a dealer can do the software check unfortunately.


Expert:  Gary replied 5 months ago.

Hi Eric,

Do you need any further help?

I hope my advice has been of assistance to you.

Kind regards