How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask rpmdiag Your Own Question
rpmdiag
rpmdiag, Tech and Instructor
Category: Chevy
Satisfied Customers: 7623
Experience:  Since 1975
12769047
Type Your Chevy Question Here...
rpmdiag is online now
A new question is answered every 9 seconds

1992 chev 350 throttle body, left work on a cooler wet day,

Customer Question

1992 chev 350 throttle body, left work on a cooler wet day, about a mile down the road while accelerating out of a roundabout my truck stalled out,tried starting it spun fast but no fire, did this several times after about 5-10 minets tried again and it started ran poorly for 2-3 second then took up ran good. got home shut it off and restated it several times no problem . first thought was fuel pump, now I'm just puzzled 287,000 miles. any ideas?
JA: Have you ever replaced the fuel pump, or is this the original?
Customer: replaced it twice last one was earlier this summer.
JA: What is the model of your '92 Chevy?
Customer: C1500 two wheel drive 350 throttle body reg cab
JA: Are you fixing your Cab yourself? What have you tried so far?
Customer: I would like to fix myself if possible, tried a little carb cleaner.
JA: Anything else you want the mechanic to know before I connect you?
Customer: no
Submitted: 7 months ago.
Category: Chevy
Expert:  rpmdiag replied 7 months ago.

Hi, I'm Ron and I will be helping you today.
Stand by for a moment while I prepare your answer.

Expert:  rpmdiag replied 7 months ago.

The problem can be a loss of spark or fuel. You can check for
spark at the plugs with a spark tester.
You can check fuel pressure with a gauge and both of these tools
should be available to you at your
local parts store for rent or purchase.
You need to check for any stored codes in the computer with a
code reader or a scan tool.
The code reader only gives the codes and definitions, where the
scan tool gives you all
the needed data to diagnose the codes.

Check compression too.

Thanks, Ron

Expert:  rpmdiag replied 7 months ago.

If you are satisfied with my answer, I would greatly appreciate a 5
star rating now and I will still assist you after you have rated me
too if another question pops up. I don’t get credit for helping you
until you rate me.
Thanks again, Ron