How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gary Your Own Question
Gary
Gary, ASE Certified Technician
Category: Chevy
Satisfied Customers: 839
Experience:  Senior Technician
84449473
Type Your Chevy Question Here...
Gary is online now
A new question is answered every 9 seconds

Ok I have an 09 Chevy impala and the low and high beams do

Customer Question

Ok I have an 09 Chevy impala and the low and high beams do not work. It first started with me sitting in traffic and my AC turned off then the battery light came on then a message displayed battery saver active . I didn't think nothing of it I just switched the AC back on. The battery. Light still showed . The next day same thing but all I had was high beam lights no dim I would dim and it wouldn't work. That went on for a few days. Then one day I got up for work I had no lights none and everything on the dashboard was lit up. Traction control airbag system ABS light
JA: Have you checked the fuses? The dashboard bulbs?
Customer: I have and the fuses are okay the caralso had a hard time moving like it didn't want to but it did
JA: Are you fixing your Impala yourself? What have you tried so far?
Customer: I have checked the fuses and I have taken the battery out and added water to it because it was all gone it was actually smoking rotten egg lsmell nothing is showing up on the dashboard now after doing that but I still have no lights
JA: Anything else you want the mechanic to know before I connect you?
Customer: No
Submitted: 4 months ago.
Category: Chevy
Expert:  david craig replied 4 months ago.

Hi Im David. thanks for visiting the site. do you have a multi meter available?

Expert:  david craig replied 4 months ago.

hello???????????

Expert:  david craig replied 4 months ago.

do you still need assistance?

Expert:  Gary replied 4 months ago.

Hello there,

Can you get a scan for codes done on your car please?

Does it still start and drive ok?

Gary

Expert:  Gary replied 4 months ago.

Hello again,

Do you still need help with your problem?

Gary