How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike S. Your Own Question
Mike S.
Mike S., Chevy Mechanic
Category: Chevy
Satisfied Customers: 6702
Experience:  ASE Certified Master Technician
Type Your Chevy Question Here...
Mike S. is online now
A new question is answered every 9 seconds

The two mounting screws for rear cylinder are striped and

Customer Question

The two mounting screws for rear cylinder are striped and will not come loose. Can I remove the back plate to have better access to those bolts on back side of plate
JA: What is the model/year of your Chevy?
Customer: 1995 Chevy lumina
JA: Are you fixing your Lumina yourself? What have you tried so far?
Customer: I tried penetrating lube, a chisel and hammer
JA: Anything else you want the mechanic to know before I connect you?
Customer: Just if that back plate can be removed. That way I could grind off old bolts.
Submitted: 12 days ago.
Category: Chevy
Expert:  Mike S. replied 12 days ago.

Hi, I am Mike, welcome. I'm reviewing your question.

Expert:  Mike S. replied 12 days ago.

The backing plate should come loose if you remove the 4 nuts/bolts but it will only come out a few inches, in order to remove it completely, you will have to remove the axle.

Expert:  Mike S. replied 11 days ago.

Did that answer your question? If so, kindly leave me a positive rating, so I get credit. After all, you have already made the deposit.