How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Chevy Technician
Category: Chevy
Satisfied Customers: 29427
Experience:  GM Grand Master Technician 2007. 14 years experience.
10949255
Type Your Chevy Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

Actually a gmc sierra, 2009 sierra 1500 sle, truck would not

Customer Question

actually a gmc sierra
JA: What year is your Sierra?
Customer: 2009 sierra 1500 sle
JA: Are you fixing your Sierra yourself? What have you tried so far?
Customer: truck would not turn over. thought it might be weak battery. replaced battery. still doesn't start. hooked up my own analyzer. fault is 'lost communication with fuel pump module'
JA: How old is the battery? And have you tested it with a voltmeter?
Customer: replaced it today
JA: Anything else you want the mechanic to know before I connect you?
Customer: no
Submitted: 1 month ago.
Category: Chevy
Expert:  GM Tech (Cam) replied 1 month ago.

Hi there, I am Cam.
on your truck, does the check engine light come on when you turn the key in?

Does the scanner work on other vehicles?

Is there anything aftermarket installed?

Customer: replied 1 month ago.
Code is U0109 lost communication with fuel pump control module. Check engine light does come on with key on. No aftermarket stuff that im aware of. Thanks.
Expert:  GM Tech (Cam) replied 1 month ago.

Ok, what is your VIN? There may be a recall.

Customer: replied 1 month ago.
VIN as follows:3GTEK23M69G134885
Expert:  GM Tech (Cam) replied 1 month ago.

Sadly no recalls, so this is likely the fuel pump module. They are common for excessive corrosion causing intrusion into the back of the module. But first verify there is power and ground on the large red and black wire.