How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Chevy Technician
Category: Chevy
Satisfied Customers: 15181
Experience:  GM Grand Master Technician 2007. 14 years experience.
10949255
Type Your Chevy Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

I'm having a problem 2006 cobalt ss supercharged when I

Customer Question

I'm having a problem 2006 cobalt ss supercharged when I plugged in the old connector it worked fine last night now the car won't start ignition lock out light on low fuel and power steering light on. Also will not recognize obd scanner powers up but will not communicate
Submitted: 7 months ago.
Category: Chevy
Expert:  BOBBYSS replied 6 months ago.

Hello, my name is***** you say the old connector, which connector are you talking about?

Customer: replied 6 months ago.
Obd
Customer: replied 6 months ago.
It's actually not not a good time right now it's 2am and I'm bed have to wake up in a couple of hours for work
Expert:  BOBBYSS replied 6 months ago.

No problem. How about continuing at some point tomorrow.

Customer: replied 6 months ago.
That's fine
Expert:  BOBBYSS replied 6 months ago.

Sounds good. Have a good night.

Customer: replied 6 months ago.
Like I was saying I connect the Obd scanner it powers up but error no connection. Also my theft lock light is on and engine won't crank low fuel light on low coolant light on power steering light in. These appeared only after the Obd connection error