How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Chevy Technician
Category: Chevy
Satisfied Customers: 15201
Experience:  GM Grand Master Technician 2007. 14 years experience.
10949255
Type Your Chevy Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

INSTALLED A REMAN BLOCK .GOT A P0343. NEW CAM SENSOR .SIGNAL

Customer Question

HELLO
INSTALLED A REMAN LONG BLOCK .GOT A P0343.
NEW CAM SENSOR .SIGNAL OK AT SENSOR .NOT A PCM. LONG STORY SHORT REWIRED SENSOR TO PCM ALTHOUGH VOLTAGE AND SIGNAL WIRES TESTED FINE .SIGNAL STILL DOES NOT MAKE IT THROUGH THE NEW HARNESS .VOLTAGE IS 12V AND WILL LIGHT A TEST LIGHT.SAME WITH 2 DIFFERENT SENSORS.CAM LOOKS NEW THROUGH SENSOR HOLE . DAVE ASE MASTER 40 YRS EXP. STILL LEARNING ?
Submitted: 7 months ago.
Category: Chevy
Expert:  AMEDEE replied 7 months ago.

Hello and welcome!

My name isCustomerand I can assist you with your question.

Expert:  AMEDEE replied 7 months ago.

Hi Dave!

Can I start by getting the VIN?

Thank you!