How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Chevy Technician
Category: Chevy
Satisfied Customers: 15133
Experience:  GM Grand Master Technician 2007. 14 years experience.
10949255
Type Your Chevy Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

2012 cruze at first cranking problems battery and alt. cks

Customer Question

2012 cruze at first cranking problems battery and alt. cks good wont crank at first try again starts a/c went out compresser is turing clutch is in .both hi/low lines are at outside temp .today tried to start car motor tuned over wont start tried again crakted fine
JA: Has the clutch been slipping? Are you having any trouble shifting?
Customer: auto trans car
JA: Are you fixing your Cruze yourself? What have you tried so far?
Customer: yes I have found corrosion on neg battery cable. not found a loose wire battery and alt shows to be good
JA: Anything else you want the mechanic to know before I connect you?
Customer: a/c clutch is in and stays in hi and lo presser hoses are at the same temp outside temp
Submitted: 2 months ago.
Category: Chevy
Expert:  Ron replied 2 months ago.

Hello. My name is ***** ***** I am happy to assist you today. Give me just a moment to review your post, and I'll be right back with the help you need.

Expert:  Ron replied 2 months ago.

Can you install a set of AC pressure gauges and read the low side as well as the high side pressures with the AC on and the compressor running and tell me what the pressure readings are?

Customer: replied 2 months ago.
no nottoday
Expert:  Ron replied 2 months ago.

Okay when you can get this done post back on this page with them and we can work from there.