Chevrolet Repair Questions? Ask a Chevy Mechanic for Answers ASAP
Have you checked the fuses to see if any of the are blown?
Do you have a digital volt meter and a test light so w can do some testing?
Can you borrow one and when you get back to the truck let me know and we can do some testing and see what is going on with your truck?
That will be ok. Just come back to this chat screen and post a message and I will be right back with you asap.
You are very welcome. Chat with you this afternoon.
Did you get a test light or a digital volt meter?
Which did you get or did you get both?
Please connect the wire from the test light to a good ground, and with the ignition switch in the run position, test ALL of the fuses in both fuse boxes by touching the tip of the test light to the metal pieces sticking up through the top of all the fuses. Please tell me what fuses have power on just one side, and what fuses have no power to them at all please.
Are there any fuses that only have power to one side of the fuse?
I also need to know what size engine you have in your truck please.
So you do have power on both sides of those two fuses?
Is the 10 a fuse you have listed ign, the ign E fuse?
Did you test the fuses in the fuse boxes on both sides of the dash board? You will have to pull the covers off of the end of the dash board where the door meets the dash to get access to the other two fuse boxes.
What are the 12 fuses in the under hood box that do not have power on them please.
and what fuses did not have power in the under dash fuse box?
Every thing that should have power to it does Now we have to do some tough testing. You will need to remove the instrument cluster to do some of the testing. The first thing I would like you to do will be a 30 minute relearn on the security system. I need to know what the security light does when you do the relearn please. Here are the steps I need you to follow please.
What ever time you need to be there is fine with me. Just let me know when you want to get back together and I will do my best to be here when you need me.
chat with you tomorrow.
All of the fuses look good. The ones that did not have power should not have power as they are not turned on such as the brake lights and wipers. I am sorry I was not online when you where here. Can you let me know when you will want to get together so we can do some testing?
I will be here to help you. Sorry again about today and not being here.
I am so sorry. Are you still with the truck?
I am here.Just let me know if you want to work on it tonight.
It is now 9:04 pm eastern time. Wjat time do you want to try to connect tomorrow?
I have an engine to finish putting in in the morning. I should be done by 1 pm.
I am so sorry. I thought you where going to contact me when you where ready. I should be online after 1 pm eastern tomorrow.