How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Chevy Technician
Category: Chevy
Satisfied Customers: 15201
Experience:  GM Grand Master Technician 2007. 14 years experience.
10949255
Type Your Chevy Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

I have a 2012 Chevrolet Tahoe with keyless entry/remote

Customer Question

I have a 2012 Chevrolet Tahoe with keyless entry/remote issues. The remotes will work immediately after you turn off the vehicle (all buttons functioning), but after a short period of time, will not function at all. Unlocking the vehicle with the ignition key causes the alarm to go off. I have purchased a new remote and have had both remotes reprogrammed on multiple occasions. Each one yielding the same result. Any suggestions?
Submitted: 10 months ago.
Category: Chevy
Expert:  Ryan Schott replied 10 months ago.

replace the RCDLR with this part number 20863945.

Customer: replied 10 months ago.
Where is the receiver located?
Expert:  Ryan Schott replied 10 months ago.

There is two different locations that year I will need your vin to check vehicle build I can can let you know

Customer: replied 10 months ago.
1GNSCBE03CR228554
Expert:  Ryan Schott replied 10 months ago.

number one in this picture, its the d-pillar drivers side by the liftgate.