How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George H. Your Own Question
George H.
George H., ASE Certified Technician
Category: Chevy
Satisfied Customers: 18629
Experience:  GM Tech ASE Master Tech 15+ years
13574682
Type Your Chevy Question Here...
George H. is online now
A new question is answered every 9 seconds

Looking for a diagram of a chevy k2500 rear axel seal and

Customer Question

looking for a diagram of a chevy k2500 rear axel seal and bearing replacement
JA: What year is your K900?
Customer: on a 1996 suburban
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: it's apart, just trying to put back together properly
JA: Anything else you think the mechanic should know?
Customer: no
Submitted: 10 months ago.
Category: Chevy
Expert:  George H. replied 10 months ago.

Hello I will help

Click here for diagram

Look that over and let me know what questios you have

Thank you

Customer: replied 10 months ago.
is there a step by step for re-assembly? I just want to make sure I'm putting the races and bearings in correctly
Expert:  George H. replied 10 months ago.

I included the whole service procedure, did it not come through with the diagram?

Click here for procedure

That is bearing specific so is it what you wanted?

Expert:  George H. replied 10 months ago.

Click here for video

Let me know how I can help

Thank you

Customer: replied 10 months ago.
rear wheel bearing?
Expert:  George H. replied 10 months ago.

Yes, that is what I posted, what are you seeing?

Expert:  George H. replied 10 months ago.

Is this a diesel? What engine do you have?

Customer: replied 10 months ago.
1996 Chevy K2500 Suburban, 7.4L V8, gas
On the rear axel : I'm replacing axel seals, inner and outer wheel bearings, etc.
Expert:  George H. replied 10 months ago.

So the ones above don't look like yours? The bearing does not fit in the housing as shown?

Do you have the full floating axle?

Expert:  George H. replied 10 months ago.

Does it look like this? There are three choices here so I need to know what yours is equipped with

Click here for diagram

Let me know so I can get you the info you need

Thanks