How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George H. Your Own Question
George H.
George H., ASE Certified Technician
Category: Chevy
Satisfied Customers: 18386
Experience:  GM Tech ASE Master Tech 15+ years
13574682
Type Your Chevy Question Here...
George H. is online now
A new question is answered every 9 seconds

Regarding the power steering pulley I just ask about. caqn I

Customer Question

regarding the power steering pulley I just ask about. caqn I just screw a bolt with washer on it to push the pulley back on the shaft and do you need a bolt in there to secure it
Submitted: 4 months ago.
Category: Chevy
Expert:  George H. replied 4 months ago.

You would need a nut to push on the pulley while you hold the bolt. The real tool is much better and free to use. Some pumps do come with a bolt that will fit but you have to have the correct length and thread.

It is a friction fit on the shaft so look at the hub of the pulley to see if it cracked and there is nothing holding it but the friction

Let me know how I can help

Thank you