How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask mike switzer Your Own Question
mike switzer
mike switzer,
Category: Chevy
Satisfied Customers: 454
Experience:  lead diagnostic tech at Aamco
93239347
Type Your Chevy Question Here...
mike switzer is online now
A new question is answered every 9 seconds

Stabilitrac light on 2008 chevy trailblazer ss and causes

Customer Question

stabilitrac light on 2008 chevy trailblazer ss and causes truck hesitation to accelerate
Submitted: 4 months ago.
Category: Chevy
Expert:  mike switzer replied 4 months ago.

did you have a code for the brake pedal switch? also what size engine do you have.

Customer: replied 4 months ago.
No code for brake switch and 6.0 engine
Expert:  mike switzer replied 4 months ago.

do you have a check engine light on by chance?

Customer: replied 4 months ago.
No check engine light other than service stabilictrac
Expert:  mike switzer replied 4 months ago.

ok you will need to have the system scanned by a local shop not autozone since you may have a code in the transmission module. this will not set a check engine light. but they will also be able to scan the traction system for codes as well. but if you are having an issue in the transmission it will set the traction light on. the trans can have an issue you dont feel.