How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Juan Crespo Your Own Question
Juan Crespo
Juan Crespo, ASE Certified Technician
Category: Chevy
Satisfied Customers: 1516
Experience:  A.S.E. Master Technician, Advanced Level, Emissions - Asian, Domestic, & European
19298667
Type Your Chevy Question Here...
Juan Crespo is online now
A new question is answered every 9 seconds

I have an 83 2.8L s-10 blazer. What is the correct firing

Customer Question

I have an 83 2.8L s-10 blazer. What is the correct firing order and spark plug gap? Please?
JA: Are you hoping to fix this yourself? What have you tried so far? What confuses you?
Customer: answer my question and the confusion will end for me
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Chevy Mechanic about your situation and then connect you two.
Submitted: 4 months ago.
Category: Chevy
Expert:  Juan Crespo replied 4 months ago.

Hi there.

Sorry you got confused by the automated "helper" - I hate that thing ;(

Anyways, spark plug gap should be set at 0.045"/1.14 mm and torqued to no more than 15 ft/lb. I've attached a graphic showing firing order as well as cylinder #1 position.

Best Regards.

Related Chevy Questions