How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tom Your Own Question
Tom, ASE Certified Technician
Category: Chevy
Satisfied Customers: 25920
Experience:  Qualified to repair all makes and models.
Type Your Chevy Question Here...
Tom is online now
A new question is answered every 9 seconds

2009 chevy uplander

Customer Question

2009 chevy uplander
Submitted: 3 months ago.
Category: Chevy
Customer: replied 3 months ago.
went for etest and there is no connection from my obd connector to the etest machine, I plugged my snap on solus scanner to the obd 2 aswell no power. please advise what to do and check to resolve this asap .
Customer: replied 3 months ago.
i put a test light to one of the obd conector pins and it keeps flickering my light?
Expert:  Tom replied 3 months ago.

See if fuse number 6 in the inside fuse box on the right hand side has power to both sides should have power all the time.

Customer: replied 3 months ago.
thank you tom think its good will confirm in morning when itake for etest
Expert:  Tom replied 3 months ago.

Ok keep me posted.

Related Chevy Questions