How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George H. Your Own Question
George H.
George H., ASE Certified Technician
Category: Chevy
Satisfied Customers: 18593
Experience:  GM Tech ASE Master Tech 15+ years
Type Your Chevy Question Here...
George H. is online now
A new question is answered every 9 seconds

I have a 05 Chevy equinox I have replaced blower switch and

Customer Question

Hi I have a 05 Chevy equinox I have replaced blower switch and blower motor and the restor wiring has no burn marks but still does not blow fuse and relay are good.
JA: Have you had any recent electrical work done on the car? Have you checked the circuit?
Customer: Yes I'm getting high resistance to the motor
JA: What is the model/year of your Chevy?
Customer: 2005 equinox
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: Yes. I put a blower motor blower switch and resistor
JA: Anything else you think the mechanic should know?
Customer: That's all
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Chevy Mechanic about your situation and then connect you two.
Submitted: 10 months ago.
Category: Chevy
Expert:  George H. replied 10 months ago.

Hello, I can help,

Do you have a voltmeter to check the circuit if I guide you?