How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George H. Your Own Question
George H.
George H., ASE Certified Technician
Category: Chevy
Satisfied Customers: 18390
Experience:  GM Tech ASE Master Tech 15+ years
13574682
Type Your Chevy Question Here...
George H. is online now
A new question is answered every 9 seconds

I'm doing an engine swap using a 98 k1500 5.7 vortec and

Customer Question

I'm doing an engine swap using a 98 k1500 5.7 vortec and need the pin out for the bulkhead connector on the engine harness
Submitted: 5 months ago.
Category: Chevy
Expert:  George H. replied 5 months ago.

Hello,

Click here for diagram

And here

Let me know if that is what you need

Thanks

Customer: replied 5 months ago.
I am under the impression that the 98 is different than that of a 97. Can you confirm that it is the same?
Expert:  George H. replied 5 months ago.

I am so sorry, looks like my eyes were not open yet

Click here for pinout. The connector numbering is the same

Let me know what I can do to help