How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Auto Mech / Electronics
Category: Chevy
Satisfied Customers: 20521
Experience:  Chevrolet Cert., Heavy Line Mech, Race Shop Owner, Mobile Electronics.
1609972
Type Your Chevy Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

Chevy coloroda: Can you tell me where the location of the P0017

Customer Question

Can you tell me where the location of the P0017 sensor bank 1 sensor B FOR A 2012 CHEVY COLARADO. I KNOW ITS ON THE RT SIDE.
Submitted: 6 months ago.
Category: Chevy
Expert:  Don 'Mo Lurch' replied 6 months ago.
which engine?
Customer: replied 6 months ago.
a 2wheel drive small enggine
Customer: replied 6 months ago.
let me go look at the book. give me a second or two.
Expert:  Don 'Mo Lurch' replied 6 months ago.
2.9, 3.7 or 5.3small engine is likely the 2.9
Customer: replied 6 months ago.
2.9 L4
Customer: replied 6 months ago.
Is there a picture with an arrow pointing at the sensor it self that can see/
Customer: replied 6 months ago.
Are you still there?
Expert:  Don 'Mo Lurch' replied 6 months ago.
still heretakes time to post
Customer: replied 6 months ago.
how much more will it cost to talk om the phone?
Expert:  Don 'Mo Lurch' replied 6 months ago.
You posted P0017That is for:DTC P0017Crankshaft Position (CKP) - Exhaust Camshaft Position (CMP) CorrelationThe engine control module (ECM) uses the crankshaft position (CKP) sensor and the exhaust camshaft position (CMP) sensor information to monitor the correlation between the crankshaft and exhaust camshaft position..I can post removal of either the Crankshaft or Camshaft Sensors, but prior to any Parts replacing, you need use of GM Scan Tool to Test & Relearn the Sensors if you replaceapprx 1 hour laborclick Attachments below.sorry...I am not able to call
Customer: replied 6 months ago.
AutoZone checked it out for me his morning.
Expert:  Don 'Mo Lurch' replied 6 months ago.
I saw that in your original question........but you did not post if it was the Camshaft Sensor or the Crankshaft SensorDid you have a look at the diagrams locations I posted, as those show both
Expert:  Don 'Mo Lurch' replied 6 months ago.
did you need more info?
Customer: replied 6 months ago.
Trying to print it off. From what I see this is in the back of the engine behind the transmission?
Customer: replied 6 months ago.
its the camshaft position actuator solenoid P0017
Expert:  Don 'Mo Lurch' replied 6 months ago.
Camshaft Sensor is on frontCrankshaft Sensor is on side rearsorry..I just noticed they were not labeled........Camshaft Actuator is # ***** in front viewCamshaft Sensor is # ***** in front view.dc3f5360-7097-4ceb-a37d-2694bf383a0b_ck2.gif
Customer: replied 6 months ago.
do I have to change body?
Expert:  Don 'Mo Lurch' replied 6 months ago.
do I have to change body????what are you referring to......change body?.Do you need Actuator Replacement procedures?
Expert:  Don 'Mo Lurch' replied 6 months ago.
did you need more info?please respond or rate my answerthank you
Expert:  Don 'Mo Lurch' replied 6 months ago.
clearly there still must be a problemplease respond so I can help further, or at least let me know what you found

Related Chevy Questions