How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask K. Wiggins Your Own Question
K. Wiggins
K. Wiggins, Chevy Technician
Category: Chevy
Satisfied Customers: 2436
Experience:  ASE Certified Technician AA in automotive Technology, 15+ years in the trade
Type Your Chevy Question Here...
K. Wiggins is online now
A new question is answered every 9 seconds

1987 Chevy one ton . 350 cu.Replaced starter solonoid .

Customer Question

1987 Chevy one ton . 350 cu.Replaced starter solonoid . Still won't crank. I have 12 volts at the start terminal . Am I not grounded ? There was only one wire ,start terminal. I obviously don't have a completedrink circuit.
Submitted: 5 months ago.
Category: Chevy
Expert:  K. Wiggins replied 5 months ago.
It should have batery cable at large stud of starter, 12 on S terminal when starting and negative cable should be running to frame with a ground starap from engine to frame or directly to engine with a ground strap running from engine to sheet metal. You can use one half of jumper cables to experiment with your ground. Let me know how it goes and I can help further if needed.
Expert:  K. Wiggins replied 5 months ago.
Hello, I was just wanting to follow up and see how things went.

Related Chevy Questions