How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Chevy Technician
Category: Chevy
Satisfied Customers: 15133
Experience:  GM Grand Master Technician 2007. 14 years experience.
Type Your Chevy Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

Chevy c-10 pickup: I am rebuilding a 1966 chevy c-10 pickup

Customer Question

I am rebuilding a 1966 chevy c-10 pickup and I took the front crossmember apart to rebuild it. My question is ....I removed the lower a-arms and found the bracket that hold the arms in place are worn-out and need to be replaced .....They are held in place by a 3/8" rivet which is 1" long with a round head on the end ....Is there something else that can take the place of those rivets ?
Submitted: 5 months ago.
Category: Chevy
Expert:  Roy replied 5 months ago.
good afternoon my name is ***** ***** I will assist is there enough room for the use of a bolt and nut??? some of the time, the bolt head will hit the arm. Roy