How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Chevy Technician
Category: Chevy
Satisfied Customers: 15133
Experience:  GM Grand Master Technician 2007. 14 years experience.
10949255
Type Your Chevy Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

While trying to change out side door hadle the rod has

Customer Question

While trying to change out side door hadle the rod for it has come undone form where it goes inside not sure where it go
JA: Sometimes things that you think will be really complicated end up being easy to fix with Chevy. The Chevy Mechanic I'm going to connect you with knows all the tricks and shortcuts. Tell me a bit more about what's going on so he can help you best.
Customer: Out side drivers door handel was broke and inside one was too so while changing inside one decided to change outside one but rod that goes to outside handel has come off the latch not sure how to put it or where it attaches
JA: Are you hoping to fix this yourself?
Customer: Yes if i can
JA: Great! What have you tried so far?
Customer: Looking inside to try to see where rod attaches
JA: Is there anything else the Chevy Mechanic should be aware of about your Chevy?
Customer: Not right now
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Chevy Mechanic about your situation and then connect you two.
Submitted: 6 months ago.
Category: Chevy
Expert:  JOHN aka Eauto replied 6 months ago.
year an model of your chevy?
Customer: replied 6 months ago.
1997 k1500
Expert:  JOHN aka Eauto replied 6 months ago.
is it connected to the latch? stryker?
Customer: replied 6 months ago.
Cab and half
Customer: replied 6 months ago.
No thats where it has come off
Expert:  JOHN aka Eauto replied 6 months ago.
can you reconnect it?
Customer: replied 6 months ago.
Not sure where it attachs there a hole on top of some of the assembly does it just go in on top
Customer: replied 6 months ago.
It is the rod that goes to latch from handel not the lock one