How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jerry Newton Your Own Question
Jerry Newton
Jerry Newton, Chevy Technician
Category: Chevy
Satisfied Customers: 4412
Experience:  ASE Master Technician, L1, Master GM Technician. Over 20 years of bumper to bumper GM experience.
25345654
Type Your Chevy Question Here...
Jerry Newton is online now
A new question is answered every 9 seconds

I want to change the power steering pressure line, It has a

Customer Question

I want to change the power steering pressure line
JA: Tell me a bit more about what's going on so he can help you best.
Customer: It has a slow leak
JA: Leaks can get messy. The Chevy Mechanic will know what to do. Are you hoping to fix this yourself?
Customer: yes
JA: Great! What have you tried so far?
Customer: I ordered the line and have in my possesion
JA: Is there anything else the Chevy Mechanic should be aware of about your Chevy?
Customer: no
JA: Our top Chevy Mechanic is ready to take your case. Just pay the $5 fully refundable deposit and I'll fill the Chevy Mechanic in on everything we've discussed. You can go back and forth with the Chevy Mechanic until you're 100% satisfied. We guarantee it.
Submitted: 8 months ago.
Category: Chevy
Expert:  Jerry Newton replied 8 months ago.

What year and model is your Chevy?

Customer: replied 8 months ago.
Chevrolet Silverado 2012 4 x4
Expert:  Jerry Newton replied 8 months ago.

OK, I'll need more info. The lines are different depending on whether you have hydroboost or not. Do you know whether you have hydroboost? This is a hydraulic brake assist system, it would take the place of a vacuum assisted booster for the brakes, so the lines would run up near the brake master cylinder.

Expert:  Jerry Newton replied 8 months ago.

Did you get this worked out? Wanted to follow up and make sure you got what you needed from me.

Please remember to rate my answers, that's how I get compensated.