How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Chevy
Satisfied Customers: 33416
Experience:  35 years experience with ASE Certs
7276279
Type Your Chevy Question Here...
Ron is online now
A new question is answered every 9 seconds

Blower resistor keeps burning up? Fan does not work on gh,

Customer Question

Blower resistor keeps burning up ?
JA: Thanks. Can you give me any more details about your issue?
Customer: Fan does not work on high, if I hit the top of dash board it comes on, now later I have been replacing resistor it only last a bout a week
JA: OK got it. Last thing — Chevy Mechanics generally expect a deposit of about $18 to help with your type of question (you only pay if satisfied). Now I'm going to take you to a page to place a secure deposit with JustAnswer. Don't worry, this chat is saved. After that, we will finish helping you.
Submitted: 8 months ago.
Category: Chevy
Expert:  Ron replied 8 months ago.

Hello and thank you for your question,

Can you tell me what your working on please, year, make and model ?

Customer: replied 8 months ago.
2003. Asto cargo van
Expert:  Ron replied 8 months ago.

Okay thank for that,

So you replace the blower motor resistor and it only last a few days , is that correct?

Customer: replied 8 months ago.
Expert:  Ron replied 8 months ago.

In most cases if replacing the resistor allows the blower to work again and then it blows out shortly afterwards that usually means the blower motor has an excessive amp draw and usually replacing the blower motor as well as install a good working resistor will solve this concern.

Customer: replied 8 months ago.
Blower has been replace
Expert:  Ron replied 8 months ago.

Okay then are you sure your just not getting defective resistors. What brand are you using. There really is noting beside a bad resistor or a failing blower motor that can burn the resistor up.

Customer: replied 8 months ago.
Used 2 different brands
Expert:  Ron replied 8 months ago.

I would consider replacing it once more and go with an OE Delco resistor.

Customer: replied 8 months ago.
Ok
Expert:  Ron replied 8 months ago.

Providing you new blower is okay which it should be then I would go with the OE resistor.

Related Chevy Questions