How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Roy Your Own Question
Roy
Roy, import/domestic specialest
Category: Chevy
Satisfied Customers: 5298
Experience:  ASE master tech for 40 years
3506196
Type Your Chevy Question Here...
Roy is online now
A new question is answered every 9 seconds

Just give me a moment.... The VIN is

Customer Question

just give me a moment....
The VIN is 3GNEK13T92G118288.......2002 CHEVY AVALANCHE 4 x 4 1500.
Submitted: 1 year ago.
Category: Chevy
Expert:  Roy replied 1 year ago.

good evening my name is ***** ***** I will assist

GM makes a kit that contains all the lines pre bent for installation. it is not expensive and has all fittings needed. the only thing you need is p clamps that hold the lines to the frame.

if you elect to make them, you can get a roll of brake line at a parts store. the roll is flexible lines that bend very easy. you will need a flaring tool that makes bubble flares for the correct mating. you should not need any connectors as the lines will need to be cut to length without cutting them and joining them. when you buy the roll of lines, 2 one 3/16 and one 1/4 and the flaring tool, you will be approaching the cost of the kit I mentioned. I bought the last kit for 75 bucks.

Roy

Expert:  Roy replied 1 year ago.

how are you making out??

please dont forget to rate me as it is the only way I get paid for my efforts

Related Chevy Questions