How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Chevy Technician
Category: Chevy
Satisfied Customers: 15201
Experience:  GM Grand Master Technician 2007. 14 years experience.
10949255
Type Your Chevy Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

I have a 2002 suburban with the airbag warning lamp on. I

Customer Question

Hi. I have a 2002 suburban with the airbag warning lamp on. I have a tool that I can use to read the fault code (intrepid neovi fire since it still supports class 2) but what diagnostic request do I need to send in order to read the DTCs?
Submitted: 1 year ago.
Category: Chevy
Expert:  GM Tech (Cam) replied 1 year ago.

Hi there, I am Cam. Can I get your first name?

With your scanner, does not have some sort of interface allowing you to simply poll for body type codes?

Customer: replied 1 year ago.
Hi. My name is***** was able to read out the fault codes and I saw the following.
I believe the SIS sensors are in the doors and the fault appeared after the doors were removed. Are you familiar with any of these faults? Thanks.ABS/TCS - Wheel Speed faults
C0222 Right Front Wheel Speed Signal Missing
C0226 Left Front Wheel Speed Signal Missing
C0237 Rear Wheel Speed Signal Erratic
C0281 Stoplamp Switch Circuit
SIR - SIS Faults
B0077 LF SIS Malfunction (Left Side Impact Sensor)
B0078 RF SIS Malfunction (Right Side Impact Sensor)
both located in the doors??
ONstar - missing communication with SDM - expected
ACM/HCM - Air Conditioning Module, Heating Control Module
B0408 Temperature Control 1 Circuit Malfunction
B3531 Air Flow Control 10 circuit malfunction