How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Chevy Technician
Category: Chevy
Satisfied Customers: 29428
Experience:  GM Grand Master Technician 2007. 14 years experience.
10949255
Type Your Chevy Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

I have a 2012 Chevy Equinox AWD. Drivers side Power window

Customer Question

I have a 2012 Chevy Equinox AWD.
Drivers side Power window goes down fine & then I have to toggle switch several times to get it back up. I have already replaced Window Switch & Power Window Motor.
All wires seem to be fine at harness.
WHAT CAN I DO??
Thank You
Bob Tedeschi
Submitted: 1 year ago.
Category: Chevy
Expert:  GM Tech (Cam) replied 1 year ago.

Bob, how are you today? I am Cam. When you toggle it severe times, does it move a bit each time or does it simply take that much to get it working?

Customer: replied 1 year ago.
Hi Cam
The window moves a bit each time I toggle (3-5 times) & then goes up freely
Expert:  GM Tech (Cam) replied 1 year ago.

Ok, let me pull up a schematic. In the mean tim,e if you help it up by pulling does it go more?

Customer: replied 1 year ago.
Pulling it up does not help.
Expert:  GM Tech (Cam) replied 1 year ago.

That is strange. The switch and motor are the 2 main components. Does the rear do the same?

Customer: replied 1 year ago.
No other problems with any other windows.
Is there a power window relay?
Expert:  GM Tech (Cam) replied 1 year ago.

No there is not, it just gets power through the same feed as the rear window. The circuit breaker is in the motor itself. That’s whats odd. IF there is anything binding in the window regulator it would do this.

Customer: replied 1 year ago.
Does this mean you cant help me with this issue??
Expert:  GM Tech (Cam) replied 1 year ago.

All I can suggest is you verify the wiring through the door, checking the wiring as it bends. After that, take the panel off, check the condition of th regulator and lube the moving parts.