How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Chevy Technician
Category: Chevy
Satisfied Customers: 15181
Experience:  GM Grand Master Technician 2007. 14 years experience.
10949255
Type Your Chevy Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

1996 s10 w/3rd door. I need to replace the pins /c the sags

Customer Question

1996 s10 w/3rd door. I need to replace the pins b/c the sags a bit (see it go up when driver's side is closed) & it rattles as I drive.
Submitted: 1 year ago.
Category: Chevy
Expert:  Greg Jensen replied 1 year ago.

Hi my name is***** me see if I can help you. I looked through my sources I cannot find a service procedure that outlines all the steps. However, I have done likely hundreds of these pins/bushings. I would be happy top answer any of your questions.

Customer: replied 1 year ago.
I'm surprised by as many 3rd door noises/rattles ive seen on the internet. Are the pins the same size for the 3rd door as the front doors?
Expert:  Greg Jensen replied 1 year ago.

I thought they were the same. I also just reviewed it with my parts dept the catalog shows them the same.