How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Chevy Technician
Category: Chevy
Satisfied Customers: 15181
Experience:  GM Grand Master Technician 2007. 14 years experience.
10949255
Type Your Chevy Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

Im having alot of trouble bleeding the front brakes on a

Customer Question

im having alot of trouble bleeding the front brakes on a 2000 chevy tracker non abs
Submitted: 1 year ago.
Category: Chevy
Expert:  K. Wiggins replied 1 year ago.

Did you bench bleed the master cylinder?

Customer: replied 1 year ago.
it came in because the front brakes locked up .the rotors were both blue and cracked.so i thought the rear distribution block got stuck.so i replaced it along with new brake lines front to rear .ive tried everything to bleed the front brakes even used the brake pumpand i can pull fluid to the rear blockfine .but when i go to bleed the front brakes no fluid
Expert:  K. Wiggins replied 1 year ago.

Thanks, you've covered the same bases I would. Let me open this back up and see if another ecpert has any thoughts. Someone should be with you shortly.

Customer: replied 1 year ago.
i think that there is a certain way to bleed the system.apparently i dont know how to do it
Expert:  K. Wiggins replied 1 year ago.

I just looked it up and it shows this as the sequence

Important: Bleed the hydraulic brake system in the following sequence:
1. Left rear wheel cylinder
2. Load Sensing Proportioning Valve (non-ABS)
3. Right front caliper
4. Left front caliper

Give that a shot if you haven't already and let me know.

Customer: replied 1 year ago.
ill try that tomorrow .i bled the left rear then i put the brake pump on the load sensing valve got plenty of fluid filled up the fluid cup.had my guy pump the brakes and fluid didnt come out of the calipers on the front
Expert:  K. Wiggins replied 1 year ago.

Sounds good, I'll be around.

Customer: replied 1 year ago.
ok ill text you tomorrow with the outcome
Expert:  K. Wiggins replied 1 year ago.

Just replying to unlock myself, no need to respond at this time

Related Chevy Questions