How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gary Your Own Question
Gary
Gary, Chevy Technician
Category: Chevy
Satisfied Customers: 15702
Experience:  15 years GM master tech
19513769
Type Your Chevy Question Here...
Gary is online now
A new question is answered every 9 seconds

I greased the ring on the inner side of the rotor ??

Customer Question

I greased the ring on the inner side of the rotor ??
Submitted: 1 year ago.
Category: Chevy
Expert:  Randall C replied 1 year ago.

Hello, what kind of noise?

Customer: replied 1 year ago.
Breaks are rubbing
Expert:  Randall C replied 1 year ago.

squeal? grinding? Hard not being there so trying to get a feel for the noise, On one side or both? the grease on insser seal is fine and actually what you were to do

Customer: replied 1 year ago.
grinding, went around the neighborhood when finish. Stop with little noise, got louder as i went, drove about 1/2 mile. was grinding at the end even when not stopping. Pull in the drive and park it.
Expert:  Randall C replied 1 year ago.

sorry, I am unsure, There are different possibles so,, let me opt out and re open the post to the other experts, One should be along shortly to help,

Expert:  Gary replied 1 year ago.

if you jack up both front tires off the ground and spin each tire by hand do you hear the noise form either front wheel ?

is there any excessive up and down play felt in any front wheel ?

Customer: replied 1 year ago.
I'll have to check on it tomorrow. I go to work in 7 hrs. going to sleep for a while.
will jack up, and check as much as I can, tomorrow evening.
thank you, ***** ***** tomorrow. good night
Expert:  Gary replied 1 year ago.

ok sounds good

Expert:  Gary replied 1 year ago.

how are you making out ?