Chevrolet Repair Questions? Ask a Mechanic for Answers ASAP
Factory Installed?Dealer Installedor Aftermarket Installed?
sorry for the delay.............Greetings...... “Hi, I’m Don (aka MOLurch) and I look forward to helping you!”.
Thank you.........IF it is Factory, the most common issue is the Hood Switch, which would cause the Remote Start not to work & the Alarm to False or not Arm.The Hood Switch is part of the Hood Latch, has 3 wires in a Gray Plug.You can disconnect to test.IF that is not the issue, then you will need use of GM Dealer Scan Tool to test the BCM (body control module) & the Communication Module.Please have ALL Remotes when Testing is done
Apprx 1 hour labor
.IF you need more information, please ask "prior" to Rating..Please do the right thing and leave a rating, using the rating system, so I may be credited for this Q&A..NOTE: Do NOT Rate on how much TIME you waited, because I am not on 24 / 7 and I answer as soon as I see the question.The question will still remain open for follow up questions if needed..Rating is very Important to our Service.