How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask BOBBYSS Your Own Question
BOBBYSS
BOBBYSS, Master Technician
Category: Chevy
Satisfied Customers: 17144
Experience:  ASE MASTER CERTIFIED, AA DEGREE AUTO/DIESEL TECH
1627031
Type Your Chevy Question Here...
BOBBYSS is online now
A new question is answered every 9 seconds

09 suburb seat back heat won't work lights come on a minute

Customer Question

09 suburb seat back heat won't work lights come on for about a minute go off, disconnected all under seat harnesses and reconnected them still same, seat bottom does heat
Submitted: 1 year ago.
Category: Chevy
Expert:  BOBBYSS replied 1 year ago.

Hello, my name is***** you for the question. Can you confirm if this is only on the driver seat?

Customer: replied 1 year ago.
it is just the driver seat back
Expert:  BOBBYSS replied 1 year ago.

Thank you. In some cases this is due to a failure in the switch itself. Most of the time if this occurs the light will not come on. If the light is blinking then it is usually caused by a failure within the climate control seat module. This is a common failure. I know you said you disconnected and reconnected everything, but did you do this under the passenger seat too? This is where the module is located.

Customer: replied 1 year ago.
disconnect both of the seat harnesses and reconnect them
Expert:  BOBBYSS replied 1 year ago.

If it still does not work then it was not a bad connection. This means you more than likely have a bad module.

Customer: replied 1 year ago.
I'll try that and get back to you thx
Expert:  BOBBYSS replied 1 year ago.

Let me know if you need anything else.