How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Chevy Technician
Category: Chevy
Satisfied Customers: 15181
Experience:  GM Grand Master Technician 2007. 14 years experience.
10949255
Type Your Chevy Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

1997 chevy s10 blazer everything is working but turn signals

Customer Question

1997 chevy s10 blazer everything is working but turn signals front and rear and fuse is not broken
Submitted: 1 year ago.
Category: Chevy
Expert:  Jerry Newton replied 1 year ago.
Try rapidly manipulating the turn signal switch in all directions, and work the hazard switch on and off 5 or 6 times, and see if the lights start working.
Customer: replied 1 year ago.
tried and nothing happened
Expert:  Jerry Newton replied 1 year ago.
OK. This problem usually stems from the multifunction switch, and sometimes if you work the switch rapidly it will start working, confirming that the switch has failed. You'll have to do a bit of disassembly and troubleshooting to pinpoint the issue. Are you equipped to do this, and do you have a test light to test circuits?

Related Chevy Questions