How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jerry Newton Your Own Question
Jerry Newton
Jerry Newton, Chevy Technician
Category: Chevy
Satisfied Customers: 4413
Experience:  ASE Master Technician, L1, Master GM Technician. Over 20 years of bumper to bumper GM experience.
25345654
Type Your Chevy Question Here...
Jerry Newton is online now
A new question is answered every 9 seconds

Chevrolet Venture LS: 2004 chevy venture pass side sliding

Customer Question

2004 chevy venture pass side sliding door operates but the back side will not latch properly.cleaned and lubed seals, still not working
Submitted: 1 year ago.
Category: Chevy
Expert:  Jerry Newton replied 1 year ago.
There are contact switches located on these sliding doors, and they get dirty over time and don't send the correct signal to the power sliding door module. The first thing to do is clean these contacts (you can see them in the door jamb), then reinitialize the door, and see what it does from there. Here is the procedure to initialize the door. Turn the ON/OFF switch for the power sliding door system to be re-initialized to the OFF position.Manually open the power sliding door completely.Manually close and latch the power sliding door.Turn the power sliding door ON/OFF switch to the ON position.Open the power sliding door completely using the B-pillar or overhead console OPEN/CLOSE switch.Close the power sliding door completely using the B-pillar or overhead console OPEN/CLOSE switch.