How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dan Your Own Question
Dan
Dan, Technician
Category: Chevy
Satisfied Customers: 23692
Experience:  Independent Shop Experience, 2 Year Automotive Diploma, & Access to Information Database
17871496
Type Your Chevy Question Here...
Dan is online now
A new question is answered every 9 seconds

Chevrolet Z 28: I have 94 z 28 runs starts fine cold or hot

Customer Question

I have 94 z 28 runs starts fine cold or hot but breaks up at 2400 rims using lots of fuel new dist coil wires plugs computer
Submitted: 1 year ago.
Category: Chevy
Expert:  Dan replied 1 year ago.
Hello, my name is ***** ***** I'm here to help get your problem solved. If it runs fine up until 2400 rpm that is a symptom of a clogged catalytic converter. Completely remove front oxygen sensors to relieve exhaust pressure, if this allows rpm to go past 2400 you know converter is clogged. Let me know how it goes or if you have more questions, thanks.
Customer: replied 1 year ago.
Removed o2sensor no difference what next?
Expert:  Dan replied 1 year ago.
Try to see if you can get rpm up higher if spraying fuel into engine at same time. I'm assuming check engine light is not coming on?
Customer: replied 1 year ago.
My mechanic is going to try the fuel test on Monday or teus sorry this is a long process I am in North Carolina and my car is in new york
Expert:  Dan replied 1 year ago.
No problem, let me know, thanks.
Customer: replied 1 year ago.
My mechanic did the fuel test u recommended . Also replaced coil again with new delco part still breaking up at 2500 rims. Next idea please no one has a clue
Customer: replied 1 year ago.
Dan did u get my message?
Customer: replied 1 year ago.
Does he know what we have done so far?
Customer: replied 1 year ago.
It has been more than 24hrs and no response. Please contact me ASAP thanks
Customer: replied 1 year ago.
phthisic message is being sent o 6 10 15 not 6. 8 15 why has no one contacted me
Customer: replied 1 year ago.
If Dan has referred me to anew mech when will he contact me?