How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Virtual Wrench Your Own Question
Virtual Wrench
Virtual Wrench, Chevy Mechanic
Category: Chevy
Satisfied Customers: 14618
Experience:  35 years Master Mechanic
2617050
Type Your Chevy Question Here...
Virtual Wrench is online now
A new question is answered every 9 seconds

Traction control/stabilatrac on dash

Customer Question

traction control/stabilatrac on dash
Submitted: 1 year ago via CarComplaints.com.
Category: Chevy
Expert:  Virtual Wrench replied 1 year ago.
Hello,
Have you tried pulling the diagnostic codes from the computer yet?
Thats ok if you havnet but it would be helpful..
Expert:  Virtual Wrench replied 1 year ago.
Hi,
I noticed you viewed your question but did not reply and i was editing it and you may not have seen where i said it was ok if you dont have the codes.
90% of the time the reason those warnings are coming on is because of a wheel speed sensor built into the wheel bearings and the hard part is figuring out which one. There were so many problems with this same thing you are experiencing that GM issued a service bulletin. Below is the bulletin for you to read. Price wise it will run around $300 to repair.
Open the link below to a new window to view the bearing/hub/sensor assembly
https://dl.dropboxusercontent.com/u/33691145/sensor.PNG
Larry
Expert:  Virtual Wrench replied 1 year ago.
Hi,
I hope that i have provided the information you were seeking. If you are happy with my service please use the required rating for me to receive credit for working with you. If you have another question about this please let me know so l can continue to help you.
LJ

Related Chevy Questions