How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dave Nova Your Own Question
Dave Nova
Dave Nova, Chevrolet Technician
Category: Chevy
Satisfied Customers: 19451
Experience:  ASE Master Certification. GM World Class Certification
11042942
Type Your Chevy Question Here...
Dave Nova is online now
A new question is answered every 9 seconds

Chevrolet trailblazerSS: I tried to change a taillight

Customer Question

I tried to change a blown taillight bulb but after I applied the new bulb I had no taillight or brakelight on either side cause I tried to change the other side to. I need help with this!
Submitted: 2 years ago.
Category: Chevy
Expert:  Dave Nova replied 2 years ago.
Do the headlights and front park lights still work?
Customer: replied 2 years ago.
Yes they do and I seen that the license plate 194 bulbs r not operating either!
Customer: replied 2 years ago.
The turn signal works, the reverse lights work, and the top third brakelight work.
Expert:  Dave Nova replied 2 years ago.
Lift the the rear seat on the drivers side to access the rear fuse panel. In this panel, check the FPRK fuse LR PRK fuse and the RR PRK fuse.
Customer: replied 2 years ago.
Tested the the necessary fuses and it shows that Im getting power out of the fuse box but still no power to them brake-taillight!
Expert:  Dave Nova replied 2 years ago.
If you have voltage at the fuses, but none at the taillight connectors then you have an open in the circuit between the two. I would start by checking the connectors at the rear fuse panel first. If the connections are okay then I would visually inspect the wiring harness for any breaks.

Related Chevy Questions