How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim's Auto Repair Your Own Question
Tim's Auto Repair
Tim's Auto Repair, mechanic
Category: Chevy
Satisfied Customers: 15379
Experience:  Have owned a repair shop for 25 yrs.
Type Your Chevy Question Here...
Tim's Auto Repair is online now
A new question is answered every 9 seconds

Chevrolet G20 Sportvan: have a 1995 G20 conversion van: need

Resolved Question:

have a 1995 G20 conversion van: need a vacuum diagram for the heating/ AC controls. I loose air flow from the front registars
at high speeds. thought maybe intake manafold leak, but I jump out the blue and brown vac line on the control assembly and tthe front air flow stays at the same air flow at idle. ?
Submitted: 4 years ago.
Category: Chevy
Expert:  Tim's Auto Repair replied 4 years ago.
this should work for you

Customer: replied 4 years ago.

my air flow in max a/c setting, front registars have plenty air flow at a idle and at lower speeds, when I get to a cruiseing speed minimum air flow.
when I jump out the brown and blue vac lines the air flow is good at all speeds?

Expert:  Tim's Auto Repair replied 4 years ago.
this sounds as if your vacuum switch itself may be bad,[maybe has a small vacyuum leak],,,sense it does work when you connect the vacuum sourse to the to the blue line
Customer: replied 4 years ago.

how important is the function of #2 tank, heater and AC control vacuum.

I tested the tank wont hold vacuum, or pressure.

Expert:  Tim's Auto Repair replied 4 years ago.
this is the bi-level,,this operates the vents and the loor vent at the same time,,not real important i wouldnt think
Customer: replied 4 years ago.
Is the part , the vacuum switchi, still available? At a
Gm dealer?
Expert:  Tim's Auto Repair replied 4 years ago.
i do have a part#,,so,i would think the dealer may still be able to get it.....if not,,you may need to get a used one from your local salvage yard or from
995 Chevy Truck G 20 Van V8-350 5.7L VIN K TBI
Control Assembly Parts and Labor
Parts Information OEM Part # Price
Control Assembly
Main Dash Unit Control
Without AC
16034630 $69.38
With AC
16126335 $158.48
Contact Dealer for most current part and price information
Labor Information Skill Level Mfg. Warranty Standard
Replace Dash Control Unit
Main Unit
B 0.5 0.8

Customer: replied 4 years ago.

not looking for complete control assembly, just the vacuum switch?

Expert:  Tim's Auto Repair replied 4 years ago.
this is the only way i can find it at the dealer
perhaps you will need to try or,your local salvage yard
Tim's Auto Repair and other Chevy Specialists are ready to help you

Related Chevy Questions