If this is Factory Cruise Control, typically the BCM is the problem, as the Cruise Control is fully Electronic & no moving partsCheck Brake Lights for operationCheck voltage on "both" sides of Fuse 43 (gas) or Fuse 40 (diesel) in the Underhood Fuse BoxIf voltage checks good & Brake Lights are good, then use of Dealer Scan Tool is needed to Test & Program the BCM & PCM
apprx 1 hour labor
Your DEPOSIT is not payment
I have sent the information you have requested & have answered .If you have more questions about a different problem or area, it is considered to be "additional" & may have to Relist.
PLEASE click ACCEPT on your page, so that I may get credit for my Answer at this time, thanks.
Even if you are a subscription or trial member you must click "Accept" for me to be paid