How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dan Your Own Question
Dan, Technician
Category: Chevy
Satisfied Customers: 23690
Experience:  Independent Shop Experience, 2 Year Automotive Diploma, & Access to Information Database
Type Your Chevy Question Here...
Dan is online now
A new question is answered every 9 seconds

Chevrolet S10 Blazer 4x4: Where are the fusible links located

Resolved Question:

Where are the fusible links located on a 1995 s10 blazer 4 door 4wd?
Submitted: 5 years ago.
Category: Chevy
Expert:  Dan replied 5 years ago.

Welcome to JustAnswer, my name is XXXXX XXXXX I'm here to help get your problem resolved. Ask follow up questions, thanks. I doubt it is a main fuse otherwise you would probably at least her a click...But fusible links are located near battery inline between the battery fuse stud and generator B terminal...If you dont even hear a click I would see if it starts in neutral....Red wire at ignition switch should have voltage if not then a fusible link could be blown but if good then not...If good voltage check yellow wire for voltage with key in start position..If no voltage on yellow but voltage on red replace ignition switch...If both are good access wires on transmission range switch both yellow and purple wires should have voltage while trying to start if only yellow replace transmission range switch. Let me know if you have questions, thanks.



Customer: replied 5 years ago.
Ive got fire all along the column. But not on the end of the purple starter wire where it connects to the starter

No start in neutral either

Ive alteady put a neutral saftey switch ignition key switch

But i will retry all of the wires in start pos again tom after work
Expert:  Dan replied 5 years ago.

Sounds good if you do above tests it will lead you to the problem and if you run into questions you can reply to this answer at any time even after you accept without any additional fee's so let me know how it goes. thanks.

Customer: replied 5 years ago.
Could it possibly be anything to do with the coil or distributer? I didnt even think of that. The fuel pump and everything still kicks on but no click on the starter
And is there any way to ground the starter besides bolting it up to the block? Since my bolt holes are boogered up? The drillbit n tap are on the way to fix my holes. But i have not been home yet to check those wires again. I just thought id throw some more ideas out there
Expert:  Dan replied 5 years ago.

Things to check are spark, compression, and fuel pressure..

Dan and 6 other Chevy Specialists are ready to help you