How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Chevy Technician
Category: Chevy
Satisfied Customers: 29456
Experience:  GM Grand Master Technician 2007. 14 years experience.
10949255
Type Your Chevy Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

silverado..replaced the driver side blend door actuator..side only

Resolved Question:

2004 silverado has no heat on driver side dual control, I have replaced the driver side blend door actuator but still have no heat on driver side only.
Submitted: 5 years ago.
Category: Chevy
Expert:  GM Tech (Cam) replied 5 years ago.

GM Tech (Cam) :

Hello, I'm Cam. Please include all the details about your issue so I can accurately advise you. I cannot see your vehicle so please be detailed.

GM Tech (Cam) :

Cn you tell me the exact location of the one you changed?

Customer:

driver side under dash

GM Tech (Cam) :

Ok, that is the issue, the drivers side control is under the center of the dash above the transmission hump, almost to the right of the hump. The left dash

GM Tech (Cam) :

One you changed is the mode door not drivers temp door.

Customer:

what is required to r&r?

GM Tech (Cam) :

Do you have the full center console or no?

Customer:

no, it has a bench seat

GM Tech (Cam) :

Perfect. The hush panel comes off with 4 screws and then this actuator with two smaller screws. Very easy.

Customer:

is it the same type actuator as the mode door? and if not what is approx. cost & supplyer

GM Tech (Cam) :

No, slightly different. You can get it anyw

GM Tech (Cam) :

Anywhe but gm ones are a better quality.

GM Tech (Cam) :

About 250

GM Tech (Cam) :

Number is XXXXX

Customer:

thanks for the help

GM Tech (Cam) :

Please reply back if you need additional help or press ACCEPT If my answer was helpful. You can reopen it at any time by replying to it and I will answer ASAP. PLease keep in mind that as experts on this site, we are only compensated for our time spent helping customers once ACCEPT is selected. Be sure to bookmark this page (CTRL D) to reply with results or ask more if you need. Thanks again for using Just Answer. Cam.

GM Tech (Cam) and 3 other Chevy Specialists are ready to help you