How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Z. Your Own Question
Ron Z.
Ron Z., - Chevy Tech -
Category: Chevy
Satisfied Customers: 17802
Experience:  18+yrs experience. State Inspector and Chevy Diagnostics
Type Your Chevy Question Here...
Ron Z. is online now
A new question is answered every 9 seconds

Chevrolet Suburban 1500: how do i reset the change oil light

This answer was rated:

how do i reset the change oil light on 2001 suburban
Welcome to! My name is DriveFast71(Ron) and I will do my best to answer all of your questions completely and accurately.

Reset the oil life monitor when the oil has been changed, use the following procedure.

  • Turn the ignition key to the RUN position.
  • Fully push and release the accelerator pedal 3 times within 5 seconds.
  • If the "Change Oil Soon" light flashes, the system is resetting.
  • Start the vehicle.
  • The oil life will change to 100%.
  • If the Change Oil Soon light comes back on, the system has not reset. Repeat the procedure.
Ron Z. and 5 other Chevy Specialists are ready to help you

Related Chevy Questions