Chevrolet Repair Questions? Ask a Chevy Mechanic for Answers ASAP
so,,neither front wheel pulls?
the actuator under the battery does pull the cable?
please tell me all you can
on the jacks,,,,,,did the front shaft turn?
when you compressed the actuator with your hands,,did it lock the front wheels?
does the 4wd indecator light up in the blazer?
yes front drive shaft turned, the light on the button works as if it is in 4h, 4l, 2h. did not try it with running... I will go out and put it on jacks again now and try it.. need about 15-20 mins. anything i should know while i do that and get back to ya with...
sorry having computer trouble here...
i dont think your transfer case actuator[encoder]is going all the way into 4wd..this may be why,it isnt pulling the cable all the way..the transfercase must go all the way into gear,,to turn the vacuum switch on top of the transfer case all the way on...this may be why it is clicking.......you may want to pull the cable by hand,,and see if it locks up....if it does,,you may just need the vacuum switch
sorry my computer is giving a fit....
let me know where you are.......
if it is turning ,,,,,pull the cable in and the vacuum actuator by hand...let me know if it locks in the front wheels..
yes...you are correct here..it may be stuck or the fork is worn......it should have locked the front,,just by pulling the cable.....so,,if the cable is connected,,it is a probelm with the slide gear or the fork