How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Virtual Wrench Your Own Question
Virtual Wrench
Virtual Wrench, Chevy Mechanic
Category: Chevy
Satisfied Customers: 14618
Experience:  35 years Master Mechanic
2617050
Type Your Chevy Question Here...
Virtual Wrench is online now
A new question is answered every 9 seconds

Chevrolet When replacing hydraulic lifters on chevy 350 small

Resolved Question:

When replacing hydraulic lifters on chevy 350 small block, does it have to be on TDC before removing old lifters?
Also, can I turn the crank with the distributor off?
Submitted: 5 years ago.
Category: Chevy
Expert:  Virtual Wrench replied 5 years ago.
Hello,

No, it doesnt matter where the crankshaft is lined up to replace them.

Yes, you can turn the engine with the dist out, but then you have to line it up to TDC before installing in back in.

If you have any further questions at all please feel free to reply. If not, Please remember we use an honor system and you must click on accept so i receive credit for assisting you.
Virtual Wrench and 3 other Chevy Specialists are ready to help you