How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask BigBob Your Own Question
BigBob
BigBob, Shop manager/technician
Category: Chevy
Satisfied Customers: 4837
Experience:  Shop Manager with 25 years experience
13327319
Type Your Chevy Question Here...
BigBob is online now
A new question is answered every 9 seconds

Where is the evo passlock module on a 1999 chevy suburban.

This answer was rated:

where is the evo passlock module on a 1999 chevy suburban. Thanks, Emmett
Greetings and welcome to just answer!!!!!!!!!!!!!


graphic



REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

  1. Disconnect the negative battery cable.
  2. Remove the knee bolster.
  3. Remove the Instrument Panel (IP) auxiliary storage compartment, if equipped.
  4. Remove the remote CD player, if equipped.
  5. Remove the ashtray.
  6. Push on the clips behind the auxiliary storage compartment or the remote CD player. Pull down in order to release the module.
  7. Disconnect the electrical connector.

INSTALLATION PROCEDURE

  1. Connect the electrical connector.
  2. Slide in the rear tabs of the module. Push up in order to engage the module.
  3. Install the ashtray.
  4. Install the IP auxiliary storage compartment, if equipped.
  5. Install the remote CD player, if equipped.
  6. Install the knee bolster.

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

  1. Connect the negative battery cable.
  2. Reprogram the EVO/PASSLOCK (TM) module.



Please let me know if I can help further,
Bob
BigBob and other Chevy Specialists are ready to help you