How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Chevy Technician
Category: Chevy
Satisfied Customers: 29428
Experience:  GM Grand Master Technician 2007. 14 years experience.
10949255
Type Your Chevy Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

Chevrolet Silverado 1500 How do i replace door pins on a 1999

This answer was rated:

How do i replace door pins on a 1999 chevy silverado newbody. The hinges are welded

GM Tech (Cam) :

Hello, I'm Cam. Please include all the details about your issue so I can accurately advise you. I cannot see your vehicle so please be detailed.

GM Tech (Cam) :

This is not difficult at all. Do you have a side grinder?

This is not difficult at all. Do you have a side grinder?
Customer: replied 5 years ago.
no I do not but could puchase one.
O, this is simple. Take the bolt out of each hinge and the check link, take the wiring out form the left dash and pull the wring back. Hen lift the. Door off. Grind the bottom of the pin off and drive them out. Do yourself a favor and use the gm kit, they are a much higher quality than all the others and have great instructions.
GM Tech (Cam) and 2 other Chevy Specialists are ready to help you
Customer: replied 5 years ago.
Could you send a visual, or print out diagram.