How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John
John, Master A.S.E Automotive technician
Category: Chevy
Satisfied Customers: 9176
Experience:  A.S.E MasterTechnician A1-A8 w/L1,38 years experience General Motors Master Technician
6408229
Type Your Chevy Question Here...
John is online now
A new question is answered every 9 seconds

Rear window wiper nozzle fell off the back of 2006hhr..hatch

Customer Question

THe rear window wiper nozzle fell off the back of 2006hhr. I bought a new nozzle but what is method to install without breaking hatch panel?
Submitted: 5 years ago.
Category: Chevy
Expert:  John replied 5 years ago.

Hello & Welcome to JA,

 

here is information that should help you.

 

Rear Window Washer Nozzle Hose Replacement
Object Number:(NNN) NNN-NNNN Size: MF

Callout

Component Name

Preliminary Procedure

  1. Remove the rear wiper motor. Remove the left body side trim.

1

Hose, Bodyside Electrical Harness Washer (Qty: 1)

Tip
Release connector claws from rear washer hose connection.

2

Hose, Rear Windshield Washer (Qty: 1)

Tip
Pull the washer hose rearward from the end gate and out from the washer elbow opening.

 

Rear Window Wiper Motor Replacement
Object Number:(NNN) NNN-NNNN Size: MF

Callout

Component Name

Preliminary Procedures

  1. Remove the rear wiper arm.
  2. Remove the jack stowage cover.
  3. Remove the jack stowage tool kit.

1

Bolts, Rear Wiper Motor (Qty: 3)

Tighten
10 N·m (89 lb in)

2

Motor, Rear Window Wiper (Qty: 1)

Tip
Pull motor rearward to access washer hose and electrical connections, lower motor into endgate and remove from exterior pivot shaft grommet.

 

 

Body Side Trim Panel Replacement - Left Side SUV
Object Number:(NNN) NNN-NNNN Size: MF

Callout

Component Name

Preliminary Procedures

  1. Remove the rear door sill trim plate.
  2. Disconnect the rear seat belt.
  3. Remove the rear body side upper trim. Refer

1

Panel Assembly, Body Side Lower Trim

Tip
Pull the seat belt through the trim panel.

2

Retainer, Body Side Lower Trim Panel (Qty: 11)