How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Chevy Technician
Category: Chevy
Satisfied Customers: 29427
Experience:  GM Grand Master Technician 2007. 14 years experience.
10949255
Type Your Chevy Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

How do you remove the headlight assembly on a 2011 silverado 3500HD

Customer Question

How do you remove the headlight assembly on a 2011 silverado 3500HD
Submitted: 5 years ago.
Category: Chevy
Expert:  GM Tech (Cam) replied 5 years ago.
Hello, I'm Cam. Please include all the details about your issue so I can accurately advise you. I cannot see your vehicle so please be detailed.
This is not all that bad, but you do need to drop the inner fender liner at the front to get at the one bolt to get the hidden screw then you remove the other bolts and grille which pops out after you take the screws out the top to remove.
graphic
GM Tech (Cam) and 4 other Chevy Specialists are ready to help you
Customer: replied 5 years ago.
I need to pull off the grill also?
Expert:  GM Tech (Cam) replied 5 years ago.
Yes sir you do, there are 2 or 4 bolts under the upper plastic. You pull the center portion of the pin up and pry it out then you can remove that cover.
Customer: replied 5 years ago.
So the grill is held on with four bolts, and they are easily located after removing th plastic shrowd?
Expert:  GM Tech (Cam) replied 5 years ago.
The bolts hold the top of the grille, and after that the face is held in with spring clips. I get on the back and gently compress the back with pliers to release them.