How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Michael Moore Your Own Question
Michael Moore
Category: Chevy
Satisfied Customers: 2956
Experience:  ASE Master/GM WORLD CLASS/GM Master/GM ASEP/Dodge Gold/Mazda cert.
Type Your Chevy Question Here...
Michael Moore is online now
A new question is answered every 9 seconds

I have a 2007 Chevrolet Cobalt the audible clicking does not

Resolved Question:

I have a 2007 Chevrolet Cobalt the audible clicking does not sound when turn signals are used the signals all work just no clicking sound. Also the headlight on audible alarm when you leave your lights on does not sound either, related?
Submitted: 5 years ago.
Category: Chevy
Expert:  Michael Moore replied 5 years ago.
The alarm sounds threw the radio. If you have a aftermarket radio the alarms will not work unless you have a alarm module installed. The turn signal clicking noise also goes threw the radio. If you have a factory radio, then make sure the drivers door speaker is working. This is where the alarm and clicking will sound threw. If the speaker is good, you may have a radio issue.
Michael Moore and other Chevy Specialists are ready to help you